Hi Sir. Jestine,
Is it okay I got 2 readings in diode SR204? Noted to the pictures that I have sent to you. Please help me and thank you in advance.
How To Test A Diode
Inductor Identified in PCB Board
Can you please help me and tell me what this symbol is that I’m pointing too with a cable tie on a pcb I am attempting to fix. I thought it was a burnt out capacitor but the symbol says otherwise. Thanks
Panasonic Remote Control Fan Repair
Hi! Mr Jestine Yong.
Thank you Mr Jestine Yong for your kindness and patience to ensure that I can repair my Panasonic fan. You really save alot of my RM in my pocket if I can repair my two fans. Today, I brought one of the two PCBAs to office and check the big black Capacitors (3x) and the small Mylar Capacitors (2x).
I found that the 3 big black Caps were o.k and the 2 small Mylar Caps had very low Capacitance. The picture of the Caps and PCBA are in the attachment below:
Colour Patches In CRT TV
Hi! Good morning Sir Jestine Yong. I’m a follower of your article and i read a some of your book. Sir I just want to ask question on 1 of my for repair item. I repaired a tv model Sharp 21v-fw650s. The problem is discoloration display. I check the following.
- Crt board all the components are good.
- I resoldered all the component and wire connections.
- I checked the connection on the main board and component as well all are ok.
- I resoldered it also.
- I checked the flyback connection and resolder it also.
- I checked the degaussed wire and connection are ok also.
- After Check everything i found nothing wrong.
No Parts For ATX Power Supplies
Hi,
Thanks for the reply. Well i will give up on the board and instead i will use the good components for future repair.
Now talking about future repair, i am very disappointed as these days there is monopoly in design of electronics. The components used are very difficult to find.